Browsing by Author "Yordanov Y."

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Optimization of the hot-pressing regime in the production of eco-friendly fibreboards bonded with hydrolysis lignin
    (2022-11-26) Valchev I.; Yordanov Y.; Savov V.; Antov P.
    This research was aimed at studying the potential of using residual lignin from acid hydrolysis as a binder in manufacturing eco-friendly, dry-process fibreboards. For that purpose, a modification of the adhesive system and hot-pressing regime was conducted. The adhesive system applied was composed of 2 % phenol-formaldehyde (PF) resin and 10 % hydrolysis lignin (based on the dry fibres). The PF resin does not only act as a binder but generally contributes to the even distribution and good retention of the main binder – hydrolysis lignin. A specific hot-pressing cycle was used. In the first stage, the pressure was 1.0 MPa, followed by an increased pressure of 4.0 MPa, and subsequent cooling. The purpose of the initial lower pressure was softening the lignin and reduction of the material moisture content. The effect of the second stage of hot-pressing on the properties of eco-friendly fibreboards was investigated. It was determined that the fibreboards produced with 2 % PF resin and 10 % hydrolysis lignin have similar physical and mechanical properties to those of the control panels, produced with 10 % PF resin at a standard hot-pressing cycle. The findings of this work demonstrate that residual hydrolysis lignin can be effectively utilized as a binder in the production of eco-friendly, dry-process fibreboards with acceptable physical and mechanical properties.
  • No Thumbnail Available
    Item
    Optimization of the hot-pressing regime in the production of eco-friendly fibreboards bonded with hydrolysis lignin
    (2022-11-26) Valchev I.; Yordanov Y.; Savov V.; Antov P.
    This research was aimed at studying the potential of using residual lignin from acid hydrolysis as a binder in manufacturing eco-friendly, dry-process fibreboards. For that purpose, a modification of the adhesive system and hot-pressing regime was conducted. The adhesive system applied was composed of 2 % phenol-formaldehyde (PF) resin and 10 % hydrolysis lignin (based on the dry fibres). The PF resin does not only act as a binder but generally contributes to the even distribution and good retention of the main binder – hydrolysis lignin. A specific hot-pressing cycle was used. In the first stage, the pressure was 1.0 MPa, followed by an increased pressure of 4.0 MPa, and subsequent cooling. The purpose of the initial lower pressure was softening the lignin and reduction of the material moisture content. The effect of the second stage of hot-pressing on the properties of eco-friendly fibreboards was investigated. It was determined that the fibreboards produced with 2 % PF resin and 10 % hydrolysis lignin have similar physical and mechanical properties to those of the control panels, produced with 10 % PF resin at a standard hot-pressing cycle. The findings of this work demonstrate that residual hydrolysis lignin can be effectively utilized as a binder in the production of eco-friendly, dry-process fibreboards with acceptable physical and mechanical properties.
  • No Thumbnail Available
    Item
    Synthesis, in vitro safety and antioxidant activity of new pyrrole hydrazones
    (2020-09-01) Tzankova D.; Vladimirova S.; Aluani D.; Yordanov Y.; Peikova L.; Georgieva M.
    Six new N-pyrrolylhydrazide hydrazones were synthesized under micro synthesis conditions, assuring about 59-93 % yield, low harmful emissions and reagent economy. The structures of the new compounds were elucidated by melting points, TLC characteristics, IR, 1H and 13C NMR spectral data followed by MS data. The purity of the obtained compounds was proven by the corresponding elemental analyses. ``Lipinski's rule of five`` parameters were applied for preliminary evaluation of the pharmacokinetic properties of the target molecules. The initial in vitro safety screening for cytotoxicity (on HepG2 cells) and hemocompatibility (hemolysis assay) showed good safety of the new compounds, where ethyl 5-(4-bromophenyl)-1-(1-(2-(4-hydroxy-3-methoxybenzylidene)-hydrazineyl)-1-oxo-3-phenylpropan-2-yl)-2-methyl-1H-pyr-role-3-carboxylate (4d) and ethyl 5-(4-bromophenyl)-1-(1-(2-(2-hydroxybenzylidene)hydrazineyl)-1-oxo-3-phenylpropan-2-yl)-2-methyl-1H-pyrrole-3-carboxylate (4a) were the least toxic. The antioxidant activity in terms of radical scavenging activity (DPPH test) and reducing ability (ABTS) was also evaluated. The antioxidant protective potential of the compounds was next determined in different in vitro cellular-based models, revealing compounds 4d and 3 [ethyl 5-(4-bromophenyl)-1-(1-hydrazineyl-1-oxo-3-phenylpropan-2-yl)-2-methyl-1H-pyrrole-3-carboxylate] as the most promising compounds, with 4d having better safety profile.