Corrosion of 316L stainless steel produced by laser powder bed fusion and powder metallurgy in pressurized water reactor primary coolant
creativework.keywords | Additive manufacturing, Austenitic stainless steel, Corrosion mechanism, Hot isostatic pressing, Laser powder bed fusion, Powder metallurgy | |
creativework.publisher | Elsevier B.V. | en |
dc.contributor.author | Bojinov M. | |
dc.contributor.author | Chang L. | |
dc.contributor.author | Saario T. | |
dc.contributor.author | Que Z. | |
dc.date.accessioned | 2024-07-10T14:27:06Z | |
dc.date.accessioned | 2024-07-10T14:51:10Z | |
dc.date.available | 2024-07-10T14:27:06Z | |
dc.date.available | 2024-07-10T14:51:10Z | |
dc.date.issued | 2024-05-01 | |
dc.description.abstract | Corrosion mechanism of 316 L stainless steel produced by laser powder bed fusion-hot isostatic pressing (LPBF-HIP) and powder metallurgy-hot isostatic pressing (PM-HIP) is studied with in-situ electrochemical impedance measurements coupled to detailed oxide film characterization. Quantitative analysis of impedance spectra using the Mixed-Conduction Model and estimation of local kinetic and transport parameters by interpretation of in-depth elemental composition profiles indicated lower corrosion and oxidation rates of LPBF-HIP and PM-HIP materials in comparison to conventional wrought 316 L. This owes to a higher fraction of low-angle grain boundaries, smaller grain size, the presence of nano-sized oxide particles and elevated Cr and Ni contents. | |
dc.identifier.doi | 10.1016/j.mtla.2024.102055 | |
dc.identifier.issn | 2589-1529 | |
dc.identifier.scopus | SCOPUS_ID:85187214375 | en |
dc.identifier.uri | https://rlib.uctm.edu/handle/123456789/928 | |
dc.language.iso | en | |
dc.source.uri | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85187214375&origin=inward | |
dc.title | Corrosion of 316L stainless steel produced by laser powder bed fusion and powder metallurgy in pressurized water reactor primary coolant | |
dc.type | Article | |
oaire.citation.volume | 34 |