Effect of the electrodeposition conditions on the morphology and corrosion behavior of Ni-Co alloys part 1: Chemical composition, cathodic current efficiency, and morphology of Ni-Co alloys electrodeposited from citrate electrolyte

creativework.keywordsAnomalous deposition, Morphology, Ni-Co alloys, Polarization studies, Stationary potentiostatic mode
creativework.publisherUniversity of Chemical Technology and Metallurgyjournal@uctm.eduen
dc.contributor.authorIgnatova K.
dc.contributor.authorPiroeva I.
dc.contributor.authorVladimitova-Atanasova S.
dc.date.accessioned2024-07-16T11:16:47Z
dc.date.accessioned2024-07-16T11:18:25Z
dc.date.available2024-07-16T11:16:47Z
dc.date.available2024-07-16T11:18:25Z
dc.date.issued2016-01-01
dc.description.abstractNi-Co alloys with varying cobalt content are electrodeposited in stationary potentiostatic mode employing citrate electrolyte, either with or without addition of saccharin (SHR) at different Ni/Co ratios and variable content of sodium citrate (Na3citrate) in the electrolyte. The changes in the microstructure, chemical composition and cathodic current efficiency of deposition (CCE) of Ni-Co alloys are studied. Scanning electron microscope, energy dispersive X-Ray and atomic absorbtion analysis are used to characterize the alloy coating.The alloy deposition is proved to be of an anomalous type. It is found that with the increase of the value of ratio Ni/Co in the solution from 1 to 5, the percentage of Ni in the Ni-Co alloy grows to 48 mass %, and the CCE decreases to about 70 %, whereas more fine-crystalline Ni-Co coatings (size of crystallites less than 100 nm) are deposited. The addition of SHR results in a strong decrease of CCE (up to 50 %), but also in formation of smooth and shimmering coatings with average size of crystallites much less than 50 nm. The coatings obtained from electrolyte with higher content of sodium citrate contain more Ni but are more coarse-crystalline, as the effect of the complexing agent is generally less pronounced in comparison with the case with SHR addition.
dc.identifier.issn1314-7978
dc.identifier.issn1314-7471
dc.identifier.scopusSCOPUS_ID:84965080913en
dc.identifier.urihttps://rlib.uctm.edu/handle/123456789/1148
dc.language.isoen
dc.source.urihttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84965080913&origin=inward
dc.titleEffect of the electrodeposition conditions on the morphology and corrosion behavior of Ni-Co alloys part 1: Chemical composition, cathodic current efficiency, and morphology of Ni-Co alloys electrodeposited from citrate electrolyte
dc.typeArticle
oaire.citation.issue1
oaire.citation.volume51
Files
Collections