Effect of Hot-Pressing Temperature on the Properties of Eco-Friendly Fiberboard Panels Bonded with Hydrolysis Lignin and Phenol–Formaldehyde Resin

Simple item page
creativework.keywordsbio-based adhesive, density, fiberboard panels, hot-pressing temperature, hydrolysis lignin
creativework.publisherMultidisciplinary Digital Publishing Institute (MDPI)en
dc.contributor.authorValchev I.
dc.contributor.authorSavov V.
dc.contributor.authorYordanov I.
dc.contributor.authorPetrin S.
dc.contributor.authorAntov P.
dc.date.accessioned2024-11-13T14:47:19Z
dc.date.accessioned2024-11-14T07:26:01Z
dc.date.available2024-11-13T14:47:19Z
dc.date.available2024-11-14T07:26:01Z
dc.date.issued2024-04-01
dc.description.abstractLignin is the natural binder in wood and lignocellulosic plants and is regarded as the main natural and renewable source of phenolic compounds. Its incorporation in the composition of fiberboards will enhance both the environmental performance of the panels and the complex use of natural resources. In recent years, the increased valorization of hydrolysis lignin in value-added applications, including adhesives for bonding fiberboard panels, has gained significant research interest. Markedly, a major drawback is the retention of lignin in the pulp until the hot-pressing process. This problem could be overcome by using a small content of phenol–formaldehyde (PF) resin in the adhesive mixture as an auxiliary binder. The aim of this research work was to investigate and evaluate the effect of the hot-pressing temperature, varied from 150 °C to 200 °C, in a modified hot-press cycle on the main physical and mechanical properties of fiberboard panels bonded with unmodified technical hydrolysis lignin (THL) as the main binder and PF resin as an auxiliary one. It was found that panels with very good mechanical properties can be fabricated even at a hot-pressing temperature of 160 °C, while to provide the panels with satisfactory waterproof properties, it is necessary to have a hot-pressing temperature of at least 190 °C.
dc.identifier.doi10.3390/polym16081059
dc.identifier.issn2073-4360
dc.identifier.scopusSCOPUS_ID:85191371171en
dc.identifier.urihttps://rlib.uctm.edu/handle/123456789/1505
dc.language.isoen
dc.source.urihttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85191371171&origin=inward
dc.titleEffect of Hot-Pressing Temperature on the Properties of Eco-Friendly Fiberboard Panels Bonded with Hydrolysis Lignin and Phenol–Formaldehyde Resin
dc.typeArticle
oaire.citation.issue8
oaire.citation.volume16
Files
Collections
Articles